top of page

TCT Monthly | Oct 2026 -Commercial Refrigeration Industry Review

Nov 6
6 min read

Editor's Note

Issue Summary

Dear Readers, welcome to the October issue of TCT Monthly: Commercial Refrigeration Industry Review.

October brought softer copper and aluminum prices as China’s peak September–October sales season ended. Mid-month copper was RMB 110,921.4/t (−0.7% vs. late September) and A00 aluminum RMB 23,570/t (−2.7%). East China Type 5 PVC rebounded from RMB 4,760–4,850/t mid-month to RMB 5,150–5,250/t by month-end, supported by energy costs and tighter-supply expectations.

The USD/CNY central parity rate reached 6.7138 on October 30, the strongest fixing since February 2023, appreciating 213 basis points from 6.7351 at September-end. The pace slowed from September, but the direction remained unchanged.

Trade controls continued to tighten. Algeria restricted imports of finished appliances that can be made locally while withdrawing CKD/SKD incentives. Indonesia banned older refrigeration equipment using specified refrigerants, and India was considering tighter licensing oversight of CKD kits. The US Section 338 exemption covered certain Canadian-origin refrigeration equipment only; it did not alter Section 301 measures on Chinese-origin products. The details below summarize the reviewed information.


SECTION 1: Key Raw Material Prices and Exchange-Rate Tracker

1. Core Raw Materials for Commercial Freezers and Refrigerators


Key Raw Material Prices
PRICE MOVEMENT ANALYSIS

Month-on-Month Trend Summary (vs.  Late September)

• Electrolytic copper: NBS recorded RMB 110,921.4/t in mid-October, down 0.7% (RMB 821.1/t) from late September. Changjiang quoted No. 1 copper at RMB 110,500/t on October 30. Prices eased slightly but remained historically high, offering only modest relief for refrigeration pipes and compressor motors.(Changjiang Nonferrous Metals)

• A00 aluminum ingot: The mid-October price was RMB 23,570/t, down 2.7% (RMB 655/t) from late September. Changjiang quoted RMB 23,780/t on October 30. The modest month-end recovery suggests limited near-term downside, with some cost relief for aluminum frames and evaporator fins.(Changjiang Nonferrous Metals)

• 304 stainless steel: October cold-rolled 304 traded around RMB 13,400–13,600/t. Mysteel’s October 30 quotes were RMB 13,550/t in Wuxi and RMB 13,450/t in Foshan, below September’s RMB 13,750–14,400/t range. The lower pricing center eased pressure on cabinet bodies and shelves, although month-end prices edged up.(Mysteel)

• Galvanized steel coil: On October 30, China Steel Network averaged RMB 4,099/t for 1.0 mm coil across 14 markets; Mysteel reported RMB 3,827/t nationally. Different samples explain the gap, but both indicate a low, slightly declining market and broadly stable costs for cabinet exteriors and bases. (China Steel Network) (Mysteel monthly report)

• PVC:East China carbide-based Type 5 PVC fell to RMB 4,750–4,850/t on October 13, then rebounded to RMB 5,150–5,250/t by October 30 as energy costs and supply expectations shifted. The RMB 300–400/t recovery added some cost pressure for PVC liners, door gaskets and insulation, although prices remained below early-September highs.(Longzhong Information, October 13 daily report) (Mysteel PVC review)


2. RMB/USD Exchange Rate

The RMB continued to appreciate against the US dollar in October, though at a slower pace than in September. The USD/CNY central parity rate reached 6.7138 on October 30, 9 basis points lower than the previous trading day—the third consecutive stronger fixing and the strongest level since February 2, 2023. It was 6.7351 at the end of September, an appreciation of 213 basis points during October (China Foreign Exchange Trade System; China News Service). On October 29, the fixing stood at 6.7147, while the onshore spot rate briefly strengthened beyond 6.66, its strongest level since June 2022 (Caixin report).

RMB/USD Exchange Rate
RMB/USD Exchange Rate

Trend summary: October’s RMB appreciation slowed to 213 basis points from September’s 477, while the direction remained unchanged. Industrial Securities expected appreciation could continue as uncertainty around the Federal Reserve meeting and US midterm elections was repriced. For exporters, a stronger RMB reduces the RMB value of US-dollar sales but lowers the cost of imported compressors and components. With two-way volatility increasing, monitor exposure and consider bank hedging when quoting and settling Q4 orders.


SECTION 2: Global Exhibition Focus

The 140th Canton Fair (Phase 1, October 15–19, Guangzhou): The commercial refrigeration section featured display cabinets as its core category, covering applications in supermarkets, convenience stores and beverage retail. Exhibitors including Aucma showcased upright display cabinets, chest display cabinets, micro-freeze cabinets and narrow-body display cabinets, with the narrow-body models designed to fit the space constraints of different retail formats. This section serves as a useful window into the export product mix of Chinese display-cabinet manufacturers. (China Quality News report)


SECTION 3: International Company Developments & Product Technology

[China Companies and Related Product Developments]

AUCMA: Anti-condensation mullion patent improves visibility in glass-door merchandisers. Granted on October 20 (CN224872721U; filed September 9, 2025), the utility model places a heater and temperature sensor in the door mullion, with cabinet temperature/humidity sensors. Dew-point-based control activates heating as needed, helping prevent condensation in humid conditions while using less energy than timed heating.(Qizhidao patent database)

Kaixue Cold Chain: A utility-model patent granted on October 9 (CN224839454U; filed December 10, 2025) covers a door-cycle test device for enclosed display cabinets. Its adjustable lever linkage accommodates different door sizes and cylinder strokes. Component-level cycle testing can supplement final inspection and help reduce failures, warranty claims and field repairs. (Sina Finance report)


SECTION 4: Tariff and Compliance Developments

1. Policy and Energy Efficiency

China’s GB 26920-2024 energy-efficiency standard: Effective April 1, 2026, the standard introduced updated energy-efficiency labeling rules with a five-year validity period. Equipment manufactured or imported before that date may defer the new label until April 1, 2028. By October, manufacturers had been operating under the standard for over six months. (National Public Service Platform for Standards Information; Testing agency analysis)

Expanded self-service printing of RCEP certificates of origin: Customs Announcement No. 135/2026 extended self-service printing to exports to Myanmar and Cambodia from September 16. Cabinet exporters should verify product-specific rules of origin for the relevant HS subheading; compressor and cabinet-material origins, together with assembly operations, determine eligibility for tariff preferences.(MOFCOM FTA Service Network (reprint))


2. Tariff Developments

Algeria: Finished commercial display cabinets under HS 8418501000 are listed with 30% customs duty, 2% PRCT, 3% T.C.S. and 19% VAT; CKD sets under 8418502000 are listed at 5%. Confirm model eligibility, local-content and authorization requirements against current HS 841850 provisions before relying on the CKD rate.(Algeria HS 841850: Duties and Source Notes | CustomsTariffs.com)

Indonesia: Ministry of Trade Regulation 47/2025, effective January 1, 2026, prohibits imports of non-firefighting cooling systems and related electronic products using CFCs, HCFC-22 or HCFC-123. It covers commercial display cabinets using those refrigerants; natural-refrigerant models such as R290 are outside this specific ban. Check refrigerant compliance for every shipment.(AHP Client Update — 14 January 2026 (PDF))

Pakistan: Finished cabinets under HS 8418.5000 carry 20% customs duty, plus 16% regulatory duty, 18% sales tax, 12% income tax and 2% additional customs duty. The public TIPP listing shows no preferential CKD rate for this line; verify any kit-rate difference against the current statutory SRO rather than household-refrigerator rates.(Pakistan Trade Information Portal; TDAP Tariff Schedule)

United States: The source reports a 37.5% effective duty on Chinese-origin commercial display cabinets under HTS 8418.50.00, including a 12.5% Section 301 duty effective July 7, 2026. The October Section 338 exemption applies to certain Canadian-origin goods only and does not change duties on Chinese-origin cabinets. (International law firm analysis; White House Fact Sheet; HTS 8418.50.00 | Import Duties and Tariff Rates)

European Union CBAM: CN 8418 Is Explicitly Included in the Expanded Scope, Making Carbon Footprint Accounting for Display Cabinets a Substantive Requirement. On 15 September 2026, the European Parliament adopted the CBAM amendment extending the mechanism to downstream products. Annex I’s iron and steel table now explicitly lists CN 8418 (refrigeration equipment), which covers commercial refrigerated display cabinets. The ITRE Committee’s April 2026 draft opinion had already recommended CN 8418, so inclusion is now substantively confirmed. Details—CN subheading breakdown, calculation methods and transitional arrangements—remain subject to implementing acts, but the direction is settled. Exporters should therefore upgrade copper/aluminium and refrigerant carbon-footprint traceability from “early monitoring” to a substantive part of 2027 EU export planning.. (Mayer Brown analysis; CBAM Guide report; PA Legam)


SECTION 5: Key Events in the Next Three Months

1. Industry Exhibitions (October–December 2026)

Industry Exhibitions (October–December 2026)

2. Policy and Market Developments

• EU CBAM negotiations: Following the first political trilogue meeting on October 20, a further round of negotiations was scheduled for November 30 (CBAM Guide). Display cabinet exporters should monitor changes to the draft CN-code annex and potential refrigerant carbon-footprint accounting requirements. Traceability systems may be worth incorporating into 2027 EU-market product planning before final rules are published.

• Enforcement of Indonesia’s MoT Regulation 47/2025: The restrictions are in force. Exporters should check the list of controlled refrigerants and applicable enforcement guidance on a shipment-by-shipment basis for Q4 orders (Trade Law Guide). The compliance advantages of display cabinets designed around natural refrigerants such as R290 may inform model selection and 2027 export planning.

• Algerian import restrictions: The list of product categories considered capable of local manufacture, and transitional arrangements following the withdrawal of CKD/SKD incentives, should be checked before pricing display cabinets for the North African market (Horizons). Exporters should monitor updates to the restriction list and verify customs classification, rather than automatically quoting under a generic finished-refrigerator code.

• Two-way RMB exchange-rate volatility: The USD/CNY fixing strengthened to 6.7138 in October; the pace of appreciation slowed, but the broad direction remained unchanged (China Foreign Exchange Trade System). For Q4 quotations, exporters may shift from September’s rapid one-way appreciation assumption to a scenario of resilient but two-way currency movements. Gross-margin calculations for US-dollar orders should retain an RMB-appreciation scenario, with quotations and settlement plans reflecting each company’s risk exposure and banking arrangements.



Disclaimer

Data and policy information in this publication were checked against publicly available sources as of November 2, 2026. Market quotations are indicative only. For finished-unit import restrictions, tariff classification and rules of origin, consult the latest official regulations in the destination country and qualified customs advisers. For questions about this issue, please contact the TCT Monthly editorial team.

 

Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating
bottom of page